WEMO counter box

The ideal plastic meter box for single and multi-family homes, holiday homes, etc. In accordance with the regulations of the electricity companies, telephone and cable network operators.

IMORTANT INFORMATIONS​

DOCUMENTS AND LINKS

HOUSE JUNCTION BOX OR MAIN FUSES UNDER THE FUSE COVER

Whether you install a separate house connection box for the main fuses (VSE standard - box) or mount the fuses directly under the cover (e.g. AEW, CKW, etc.), WEMO flex is available in every design.

BOX

Made of glass-fibre reinforced polyester with water-repellent profiles on the edge of the door, so no rusting and no oxidation.

HEAT INSULATION

Thanks to the very low thermal conductivity of the glass fibre polyester of only 0.3 kcal/mh°, no additional box insulation is required (for comparison: wood 0.15, brick 0.5, aluminium 175!).

DORS

Anodised aluminium colourless with protective foil. Door opening limiters and door stops prevent damage and allow undisturbed working. Door adjustable with door adjustment element. Larger boxes have 2 doors. Normally a common door over "electrical part", TT - compartment and TV - compartment.

LOCKS

Square tongue lock with 6 mm backset, on request bar lock or preparation for Kaba or SEA.

GRUND RUST GRUNDROST

Made of extruded aluminium profiles, movable on two levels to accommodate all makes of service connection box, meter brackets, meter plates etc.

DIN PROFILE 35 MM

For snapping on fuse elements, terminals, automatic machines etc. Installation of fuse elements on request.

FUSE COVER

Made of 3 mm thermoplastic, mounted with captive screws, sealable, with the appropriate cut-outs. All box types with receiver place are provided with a sealing cover for the control fuse.

MAIN FUSE

Input side with additional cover against unintentional contact (order separately).

CABLE GLANDS

Holes for cable entries can be drilled very easily and quickly with standard crown or twist drills

RAINROOF

Is additionally available and is mounted after moving the box by means of the supplied mounting tape.

SIZES

WEMO flex complies with the regulations of the VSE standard box. However, it is also available in different widths and heights, adapted to the respective factory regulations.

GROUND

For the uniform depth of 240 mm are available:
Inner widths from 500 mm to 1450 mm
Interior heights from 700 mm to 1700 mm

APPARATUS MOUNTING

Meters and ripple control receivers are mounted with meter brackets or plates. The house junction box (where the main fuses are not directly under the fuse cover) is mounted using a special bracket. This allows the house junction box to be placed on the left or right.

WIRE GUIDE PLATES

Wire guide plates for standard meters (also without meter plates) can be mounted on request.

 

WEMO FLEX

Located in the middle between the Beznau, Leibstadt and Gösgen nuclear power plants, as a manufacturer of components that are used in these plants to generate electricity, we are very familiar with the energy "electricity". However, we also know the requirements of the power stations as well as the electricians and are therefore able to adapt our facade boxes to the latest knowledge and regulations.


WEMO flex stands for flexible, and means that even after the WEMO flex meter box has been moved, the house connection box can still be mounted on the right or left without any alterations (or if you wish, in the middle as well). Of course, we can supply you with the box in any desired design - flexible as we are.

PLATES AND / OR BRACKETS INCLUDED IN THE PRICE

Equipment

We are able to equip the boxes according to the regulations of all plants. Please call us for special designs.

TV + TV - FACH

TT junction boxes are mounted under the same door as the rest (Swisscom approval of 20.8.1999). The TV connection or a remote measurement for gas and water may also be installed in the same compartment.

ASSEMBLY NOTICE

If the specified wall recess is adhered to, the edge protruding outwards cleanly covers the recess (important for exposed masonry or exposed concrete). Subsequent foaming with assembly foam has proven to be very effective.

ATTENTION!

Unclamp the box inside to resist the pressure of the foam! In the internet catalogue you will find most types and sizes. But we are able to deliver much more types and sizes. Please call us.

 

Phone   +41 62 867 20 60
Fax   +41 62 867 20 61
E-Mail   office.composites@axpel.com

Imprint / Privacy policy

  • Weiß LinkedIn Icon

©2020 aXpel composites AG